Professional oxalic acid vaporizer OXALIKA PRO Smart with valve for the rapid insertion of oxalic acid. Also supplied with a process cap. Quick and easy to use. Equipped with temperature control, available in 12 Volt, 110 Volt, and 220 Volt. CE and RoHS certified.
High power 300-360 Watts.
Available in: 12 Volt, 110 Volt and 220 Volt.
Anticorodal aluminum boiler
Guarantees a more uniform temperature distribution without the formation of “hot spots” and “cold points”.
In this way a lower vaporizer time is obtained. 10 seconds for 1 gram of oxalic acid, 25 seconds per 2 grams of oxalic acid.
Makes the device insensitive to low ambient temperatures and the presence of wind and contributes to battery saving.
Interchangeable diffuser tube
For treatment from the cable cover or from the opening of flight also with hives with the little door, plastic and polystyrene hives (with appropriate adapter).
The diffuser tube is straight making obstruction more difficult and, in any case, its possible unclogging easier.
Very robust and reliable construction.
It works with pure oxalic acid.
Check if the use of pure oxalic acid for sublimated use is allowed in your country.
Instructions for Use:
Instructions for Use:
The short tube is suitable if you are doing the treatment from the back of the hives.
The long tube and the medium tube are suitable for treatment from the front. It is necessary to choose the length according to the overhang of the flight step. Only the tip of the tube (2 cm) needs to be inserted into the hive. The shorter the tube, the better the vaporizer works even in the presence of cold and strong wind.
The system keeps the boiler at a temperature between 215 and 230 ° C. When you use the vaporizer you do not notice the temperature variations and you can continue to do treatments without having to wait between the end of one vaporization and the start of the next.
About 8-10 minutes.
A 12 Volt car battery with a capacity of at least 70 AH is recommended. You will have autonomy for at least 1 hour. If possible, it is recommended to connect the vaporizer to the car battery for an initial warm-up (8-10 minutes) with the engine running. So switch to the other battery only when the vaporizer is hot. If you have hives close to each other and you can go directly from one to the other, you can do at least 80-100 treatments with this method.
Obviously, there are batteries of different quality and efficiency.
To keep your battery efficient, the first rule is to make sure it is always charged even when not in use. To prevent it from losing efficiency, the voltage must always be above 12.4 volts. The second rule is to prevent complete discharge, the voltage must never drop below 11.5 volts.